===============================================================================

       Projector Management Utility                               Ver. 1.0.0014
                                                    2014.11.21  RICOH CO., LTD.
===============================================================================
INTRODUCTION

We would like to thank you for purchasing a Ricoh product.
This file describes how to set up Projector Management Utility and contains 
the most up-to-date information that was available at the time of the software 
release.
Make sure to read this before installing Projector Management Utility.

For more details about Projector Management Utility, refer to Projector 
Management Utility's Help.

-------------------------------------------------------------------------------
[1] Features of Projector Management Utility

*Uses a LAN to connect, control, and monitor projectors and computers that are 
compatible with PJLink. 

*Allows for control of the projector from the computer.

*Allows for the periodic acquisition of status information and monitoring.

*Multiple projectors can be controlled and monitored together.

[2] Operating Environment

*Required Operating System
	Windows Vista (32-bit/64-bit)
	Windows 7 (32-bit/64-bit)
	Windows 8 (32-bit/64-bit)
	Windows Server 2008 R2 Standard SP1 (64-bit)

*Required Hardware Configuration
	Wired LAN

	IEEE802.11g/b/a wireless LAN adapter and a computer with a built-in 
	IEEE802.11g/b/a wireless LAN board

	Note:
	Even with wireless LAN that meets the IEEE802.11 standard, the 
	establishment of connections might not be possible or the transfer rate 
	may become slower depending on the adapter and the built-in computers.


[3] Install/Uninstall Restriction

*To install or uninstall, it is necessary to log in beforehand with administrator 
rights.

[4] Note and Restriction

*If communication cannot be made with a registered projector, it may take time 
to refresh. 

*When refreshing, errors are sometimes made in information acquisition. 
Press the Refresh button again.

*If the application software has been closed during refreshing, it may not be 
possible to restart the application for a short time.

*Ricoh projectors do not support video muting alone, or audio muting alone.

*Auto search is valid for projectors in the same subnetwork.

*Auto search cannot be performed during refreshing of the Main Screen Projector
 (/Group) List.

*Auto search may take approximately 30 seconds. (The search time will differ 
depending on the network environment that you are using.)

*Depending on the circumstances of the network, it may be difficult to find 
a projector with Auto search.

*When the projector cannot be found with Auto search, register the projector 
using its IP address.

*It may take some time for an Auto search to be cancelled. Wait until the 
cancellation processing has been completed.

*Projectors that have an IP address and have already been registered will not be 
displayed on the registration candidate list.

*Names of projectors that have a password set will be displayed as "********" 
until authentication has been established.

*Groups can be created at up to the third level including the root.

[5] Contents of Projector Management Utility

For more details about Projector Management Utility, refer to Projector 
Management Utility's Help.

-------------------------------------------------------------------------------
Microsoft(R), Windows(R), and Windows Vista(R) are either registered trademarks 
or trademarks of Microsoft Corporation in the United States and/or other 
countries.
Other product names used herein are for identification purpose only and may be 
trademarks of their respective companies. 
We disclaim any and all rights in those marks.
